Canon Projectors Manuale Utente Scaricare il pdf (Pagina 67)

PROJECTING AN IMAGE FROM AV EQUIPMENT

Projecting a Video Image from an AV Equipment

You can project a video image with the steps similar to those for projecting an image from a

computer.

This section provides information specific to the projection from an AV equipment.

For more detailed information for each step, refer to the corresponding page.

1 Turn on the projector. P38*

z Connect the power cord and turn on the projector. P38

z Adjust the height of the projecting image. P41

z Select a display language for the first time. P39

z Adjust the focus by performing the auto setup or the focus adjustment if you can-

not read the message due to out of focus. P44, 49

2 Prepare the AV equipment.

z Turn on the AV equipment and start playing the video image.

3 Press the button to switch the input signal. P68

z Select [DIGITAL VIDEO] as the input signal.

4 Press the button. P68

z Adjust the input signal, focusing, keystone distortion, and so on automatically

using the auto setup function.

5 Press the button.

z Select an appropriate image mode depending on the projecting image. P53*

z Select an appropriate screen mode from the [Aspect] menu. P71, 88, 89

Turn off the projector. P58*

z Turn off the projector and remove the power cord from the AC outlet.

* Those steps are same as those for projecting the computer screen.

For digital content video image:

topping projection...

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 140 141

Nessun commento

Canon Projectors Manuale Utente Pagina 67