NETWORK CAMERA Start GuidePlease read carefully Start Guide and the Operation Guide. Especially be sure to read "Safety Precautions" before
xChecking of Bundled ItemsOperation Manuals The VB-C500VD/VB-C500D comes with Start Guide (this document) and Operation Guide included in the Setup CD
xiHow to Read This Document The screenshots used in the Start Guide and Operation Guide are mainly from Windows Vista and Windows 7. Unless otherwise
xiiSafety PrecautionsThe following explains the items that must be observed when using the VB-C500VD/VB-C500D.If they are not observed, injury, death
xiiiSafety PrecautionsFCC NOTICENetwork Camera, Model Name: VB-C500VD/VB-C500DThis device complies with Part 15 of the FCC Rules. Operation is subject
xivSafety PrecautionsPrecautions for Installation Warning Do not install the product in the following places: • Place receiving strong direct sunligh
xvSafety PrecautionsPrecautions for Use Warning • If smoke, abnormal noise, heat, odor or any other abnormality is detected, immediately stop using t
xviSafety PrecautionsNotes on Use of Motion Detection, Stream for Recording and Bundled Recording Software RM-LitePrecautions for Use of Optional AC A
xviiSafety PrecautionsMaintenanceTurn off the power before cleaning the camera ( P. 2-7). Cleaning of Exterior 1. Dampen a soft cloth with water or
xviiiSafety Precautions
Before Use The following explains the features of this camera, bundled software, operating environment, and name and function of each part.
iiIntroductionThank you for purchasing Canon Network Camera VB-C500VD/VB-C500D (hereafter referred to as VB-C500VD/VB-C500D).This Start Guide describe
1-2Features of VB-C500VD/VB-C500DThe VB-C500VD/VB-C500D is a compact network camera for indoor installation integrating camera and server features.
1-3Features of VB-C500VD/VB-C500D11Before Use PoEThe VB-C500VD/VB-C500D supports Power over Ethernet (PoE*) technology, which enables simultaneous vi
1-4Features of VB-C500VD/VB-C500D Image Upload Function and Event Notification using E-Mail or AudioEvents generated by the motion detection function
1-511Before UseBundled Software The VB-C500VD/VB-C500D comes with the software specified below. For the latest information on this product (firmware,
1-6Bundled SoftwareVB-C500 Viewer ( "Overview of VB-C500 Viewer" in Operation Guide)VB-C500VD/VB-C500D Viewer is for displaying video captu
1-7Bundled Software11Before UseSoftware Configuration of RM-LiteRM-Lite Storage Server and RM-Lite Viewer can also be installed in, and run on, the sa
1-8Bundled SoftwareKey Functional Limitations of RM-Lite and RM-64/RM-25/RM-9*1 The operational limits apply depending on the number of cameras, Stora
1-9Bundled Software11Before UseComparison of Two Viewers The VB-C500VD/VB-C500D has two viewers. The key differences are specified below.VB-C500 Viewe
1-10Operating Environment For the latest information on this product (firmware, bundled software, operation manuals, operating environment, etc.), vis
1-11Operating Environment11Before UseNetwork Video Recording Software RM-LiteCPUIntel XEON 3060 2.4 GHz, Intel Core 2 Duo 2.4 GHz or higher, or an Int
iiiIntroductionCopyrightVideos, images or sounds recorded with your VB-C500VD/VB-C500D may not be utilized or published, without consent of copyright
1-12Notes on Operating Environment Notes on Use When the [Windows Firewall] Function is Enabled When [VB Initial Setting Tool] is started, the [Window
1-13Notes on Operating Environment11Before Use3. The [Add a Program] dialog box appears. Click [VB Initial Setting Tool], and then click [OK].Notes on
1-14Notes on Operating Environment2. The [Trusted sites] dialog box appears.Clear the [Require server verification (https:) for all sites in this zone
1-15Notes on Operating Environment11Before Use3. Click [Trusted sites], and then click [Sites].The [Trusted sites] dialog box appears.This completes t
1-16Notes on Operating Environment2. Click [Sound].3. An [Audio Service Not Running] message appears. Click [Yes].4. The [Sound] dialog box appears. C
1-17Notes on Operating Environment11Before UseNotes on Use with Windows Vista or LaterThe following restrictions apply when the VB-C500VD/VB-C500D is
1-18Notes on Operating EnvironmentName and Function of Each Part Dome Case/Inner Cover/Camera Interior(1) Dome case(2) Inner cover(3) Varifocal lensHo
1-19Notes on Operating Environment11Before UseTop View of Camera (Without Dome Case) (10) Reset switchTurn on the power while pushing this switch. Con
1-20Notes on Operating EnvironmentBottomThe serial number and the MAC address required for network settings are specified on the bottom of the camera.
1-2111Before UseOptional ItemsPurchase optional items separately as necessary.Audio Interface Cable WA500-VBUse this interface cable (UL VW-1 Cable) t
ivIntroductionTrademark Notice Canon and the Canon logo are registered trademarks of Canon Inc. Microsoft Windows and Microsoft Internet Explorer ar
1-22Optional ItemsI/O Interface Cable WC500-VBUse this interface cable (UL VW-1 Cable) to connect the camera to a contact input/output device (sensor,
1-23Optional Items11Before UseRecessed Mounting Kit SR500-S-VBThe Recessed Mounting Kit is a dedicated option for VB-C500VD/VB-C500D. Use example AC A
1-24Optional ItemsNetwork Video Recording Software RM-64/RM-25/RM-9High-functional monitoring & recording software that achieves simultaneous moni
Initial Setting and Installation of CameraThe following explains how to install the camera. First, install the necessary software from the bundled Set
2-2Flow of Setup Insert the bundled Setup CD-ROM in the PC and install the necessary software ( P. 2-4). Connect the VB-C500VD/VB-C500D and PC to the
2-3Flow of SetupInitial Setting and Installation of CameraStart VB Initial Setting Tool and perform initial setting of the camera ( P. 2-10). Check t
2-4Step 1 Install the SoftwareInstall the Necessary SoftwareFirst, install the necessary software from the bundled Setup CD-ROM ( P. 1-5).Software fo
2-5Step 1 Install the SoftwareInitial Setting and Installation of CameraInstall VB Initial Setting Tool, which is required for the inital setting of t
2-6Step 2 Connect the Camera to the NetworkConnect the Camera to the Network and Turn On the Power Here, an example of connecting one camera to a PC v
2-7Step 2 Connect the Camera to the NetworkInitial Setting and Installation of CameraThis camera has no power switch. If the power is supplied by the
vIntroductionEuropean Union (and EEA) only.These symbols indicate that this product is not to be disposed of with your household waste, according to t
2-8Step 2 Connect the Camera to the NetworkNote When turning off the power and then turning it back on, wait for at least 5 seconds before turning on
2-9Step 2 Connect the Camera to the NetworkInitial Setting and Installation of Camera Use of External Power Supply An AC adapter, or 12-VDC or 24-VAC
2-10Step 3 Perform Initial Setting of the CameraPerform Initial Setting of the CameraSet the network for the VB-C500VD/VB-C500D using VB Initial Setti
2-11Step 3 Perform Initial Setting of the CameraInitial Setting and Installation of Camera3. Enter the user name "root" and default password
2-12Step 3 Perform Initial Setting of the CameraThis completes the initial setting.Note To obtain an IP address from the DHCP server, first you need
2-13Step 3 Perform Initial Setting of the CameraInitial Setting and Installation of CameraCheck the Video Captured by the CameraWhen the initial setti
2-14Step 3 Perform Initial Setting of the Camera3. The viewer starts and video captured by the camera is displayed. This completes the video check pro
Initial Setting and Installation of Camera2-15Step 4 Install the Camera Note on Use before Installing the CameraBe sure to install the camera after se
2-16Step 4 Install the CameraInstallation Procedure for Direct Mounting on a Ceiling/Wall * The figure shows VB-C500D.1. Use the bundled template to d
2-17Step 4 Install the CameraInitial Setting and Installation of Camera2. Remove the dome case. VB-C500VDLoosen the three dome case lock screws using
viIntroductionOpen Source SoftwareThe product (VB-C500VD/VB-C500D and bundled RM-Lite Viewer) contains Open Source Software modules. See OpenSourceSof
2-18Step 4 Install the Camera4. Affix the safety wire to the camera and also to the installation location (anchor or structure in the ceiling, etc.).*
2-19Step 4 Install the CameraInitial Setting and Installation of Camera VB-C500VDConcealing the Wiring in a CeilingCut out the tabs on the cable cove
2-20Step 4 Install the CameraNoteAffix each interface cable in the specified groove, as shown below.If the cable is not properly installed, it may com
2-21Step 4 Install the CameraInitial Setting and Installation of Camera VB-C500DConcealing the Wiring in a CeilingCut out the tabs. Guide the interfa
2-22Step 4 Install the CameraWiring on a CeilingCut out the side face of the cable cover with the V-shaped groove. Guide the interface cables out towa
2-23Step 4 Install the CameraInitial Setting and Installation of Camera6. Connect the LAN cable, and also connect each external device using a cable.C
2-24Step 4 Install the Camera9. Adjust the camera angle.Push the inner cover in the direction of the arrow, as shown below, to remove the cover. * The
2-25Step 4 Install the CameraInitial Setting and Installation of Camera Focus Adjustment MethodTo adjust the focus, press the reset switch to enter t
2-26Step 4 Install the Camera11. Install the inner cover. VB-C500VDRemove the damper lock plate.12. Place the dome case on the camera, and affix it
2-27Step 4 Install the CameraInitial Setting and Installation of CameraInstallation Procedure for In-Ceiling with a Ceiling/Wall* The figure shows VB-
viiContents Introduction ...ii Checking of Bundled Items
2-28Step 4 Install the Camera2. Use the In-Ceiling Template supplied with the Recessed Mounting Kit to determine the installation position of the came
2-29Step 4 Install the CameraInitial Setting and Installation of Camera5. Affix the assembled in-ceiling bracket assembled with the camera, on the ins
2-30Step 4 Install the Camera7. Install the recessed mounting cover.Align the mark (c) on the recessed mounting cover with the mark (I) on the in-ceil
Appendix This section explains the external dimensions, specifications, external device input/output terminals, audio input/output terminals, etc.
3-2External Dimensions VB-C500VD155mm (6.10 in)118mm (4.65 in)112mm (4.41 in)76mm (2.99 in) Bottom95mm ( 3.74 in)4- 4.6mm (0.16- 0.18 in)
3-3External DimensionsAppendixVB-C500VD/VB-C500DRecessed Mounting Kit SR500-S-VB (Option)148mm (5.83 in)108mm (4.25 in)110mm (4.33 in)64mm (2.52 in)Bo
3-4Main Specifications VB-C500VD/VB-C500DCamera Image sensor 1/4-inch CCD (primary color filter) Number of pixels Effective pixels: 330,000 pixels Sc
3-5Main SpecificationsAppendix*1 Note that the frame rate may drop depending on the performance of the viewer PC, number of clients connected at thesa
3-6Input/Output Terminals The various input/output terminals of the camera are located inside the cable cover at the bottom of the camera. To connect
3-7Input/Output TerminalsAppendix External Device Input Terminals (IN1, IN2) There are two sets of external device input terminals (IN1, IN2), where
viiiContentsChapter 2 Initial Setting and Installation of Camera Flow of Setup ...
3-8Input/Output Terminals Internal Connection Diagram Audio Input/Output TerminalsOne audio input terminal and one audio output terminal is available
3-9Input/Output TerminalsAppendix Audio Input, Used as Both LINE IN and MIC IN (Monaural Input) Connects the camera to a microphone. As for audio inp
3-10Input/Output TerminalsNote Switch the LINE IN/MIC IN setting on the Setting page according to the microphone specification. See "Audio Input
3-11Input/Output TerminalsAppendix
CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, JapanCANON EUROPA N.V.Bovenkerkerweg 59, 1185 XB Amstelveen, The NetherlandsYT1-1421-002
ixChecking of Bundled ItemsThis product comes with the following items. If any item is missing, contact the store where you purchased the product. 7.
Commenti su questo manuale