Canon WFT-E1 Manuale Utente Scaricare il pdf (Pagina 72)

The ﬁrst step to performing this conﬁguration step is to log into your

router’s conﬁguration pages. This is normally done by opening up a web

browser and typing in the IP Address of the router (this is the value called

default gateway on your computer - generally something like 192.168.0.1).

After you have logged into the router (refer to the router’s manual for details)

you will be presented with a web page similar to that shown in ﬁgure C.3.

Browse through the menus to ﬁnd the port forwarding/virtual server

ﬁelds (usually in either the security or gaming sections - as above, see your

manual). This page should look similar to the window shown in C.4 and

have a number of ﬁelds used to enter the necessary parameters and conﬁgure

the server. Once you are in the appropriate location enter the following

information into the provided form:

• Application Name - Used simply to remind you of the meaning of

the entry. Enter the string ’ITP’ or simply ’FTP’ in this ﬁeld.

• Source Port (or just Port) - Enter port 21 into this ﬁeld. If you are

prompted for a range, simply enter 21-21 to limit things to the port

used by the FTP protocol.

• Destination Port - Enter the same value as you did above.

• Protocol - Select TCP as the FTP protocol runs on top of the TCP

transport layer.

• IP Address - Enter the IP Address of the computer running ITP. If

you are unsure of this, go to the control centre and check the list of

addresses mapped to the adapter - select the one most similar to the

address of the router and enter it here.

Once the above parameters are entered, save your changes and then exit

the web interface for the changes to take eﬀect. The conﬁguration you just

entered will now allow incoming FTP connections to pass through the router

and be passed to your computer. Once there, ITP will then handle the in-

coming ﬁles as if they were received directly by the computer and will be able

to handle images coming in from any location with an internet connection.

The next step is to set up your camera to make use of this ability.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 85 86

Nessun commento

Canon WFT-E1 Manuale Utente Pagina 72